WRAP SEAL QUICK REPAIR KIT FOR PIPE LEAKS

WRAP SEAL QUICK REPAIR KIT FOR PIPE LEAKS

FEATURES:

• Repairs leak in 30 minutes  Applicable to pipes up to 18″ (457 mm) diameter  
• Applicable on any metal or non-metal pipes  
• Repairs T-joint, elbow joint, valve thread, valve body  
• Withstand pressure up to 400 psi (28 kg/cm2)  
• Withstand temperature up to 200 °C (392 °F)  
• Safe for drinking water and resistant to most chemicals  
• Reinforce and strengthen pipe after repair  Permanent repair and extend service life of pipes

APPLICABLE MATERIAL:

• Steel  
• Copper  
• Aluminium  
• Galvanized steel  
• PVC  
• CPVC 
• Stainless steel  
• Polyethylene  
• Polypropylene  
• Cast-iron  
• Concrete  
• FRP/GRE

CHEMICAL RESISTANCE:

• Oil  
• Water (drinking water, wastewater, steam)  
• Solvents (acetone, toluene, MEK, ethyl alcohol)  
• Mild acids (hydrochloric acid, sulfuric acid) and alkalis  
• Chemical (ethylene glycol, xylenes, ammonia)  
• Hydrocarbons  
• Bases  
• Slurries  
• Fuels (petroleum, diesels, gasoline)  
• Gases (LNG, LPG)  
• Organic salts

WORKING TIME (FIBERGLASS TAPE):

•  1 minute at 30 °C (86 °F)

CURING TIME:

• 30 minutes at 30 °C (86 °F)
• Heat may be applied to decrease curing time
• Unopened foil pouch may be immerse in cold water prior to repair to add working and curing time.

APPLICATION:

• Pipe repairs
• offline repairs
• sealing joints
• hazardous material spill control
• reinforce thinning walls
• Abrasion protection
• Structural reinforcement
• Repairs in hard to reach areas
• Underwater repairs

OPERATING TEMPERATURE:

• Continuous – From -29 °C (-20 °F) up to 200 °C (392 °F)
• Intermittent – From 200 °C (392 °F) up to 320 °C (570 °F)

OPERATING PRESSURE:

• Recommended for pressure up to 400 psi (28 kg/cm2)
• (Results vary depending on pipe size, type of pipe, hole size, pipe content and method of application)

APPLICABLE INDUSTRIES:

• Building & amp; Facilities
• Electronics
• Industrial Processing
• Irrigation
• Oil & amp; Gas
• Chemical
• Manufacturing Plants
• Marine
• Military
• Offshore
• Food Processing
• Petrochemical
• Pharmaceutical
• Power Generation
• Pulp & amp; Paper
• Wastewater
• Water Distribution

TECHNICAL DATA

Pressure tested:	1/2″ (15 mm) steel pipe with 1/8″ (3 mm) hole when repaired with Wrap Seal withstands 4000 psi (281 kg/cm2) 1/2″ (15 mm) steel pipe with 1/2″ (13 mm) hole when repaired with Wrap Seal withstands 600 psi (42 kg/cm2)
Tensile strength:	3920 psi (276 kg/cm2)
Bond strength:	230 psi (16 kg/cm2)
Tensile elongation:	1.2 % ± 0.7 %
Compressive strength:	13750 ± 530 psi (967 ± 37 kg/cm2)
Yield strength:	2260 psi (159 kg/cm2)
Cured hardness:	82 Shore D

Pipe size	Number of rolls / size required
	50 psi (4 kg/cm2) 10 plys	150 psi (11 kg/cm2) 15 plys	400 psi (28 kg/cm2) 20 plys
½” (15mm)	1 A	1 A	1 A
¾” (20mm)	1 A	1 A	1 A
1″ (25mm)	1 A	1 A	2 A
1¼” (32mm)	1 A	2 A	3 A
1½” (40mm)	2 A	2 A	1 B
2″ (50mm)	1 B	1 B	1 B
2½” (65mm)	1 B	1 B	2 C
3″ (80mm)	1 B	2 C	2 C
4″ (100mm)	1 B	2 C	3 C
5″ (125mm)	2 C	2 C	3 C
6″ (150mm)	2 C	2 C	4 C
8″ (200mm)	2 C	3 C	5 C
10″ (250mm)	3 C	4 C	6 C
12″ (300mm)	4 C	5 C	8 C
14″ (350mm)	4 C	6 C	8 C
16″ (400mm)	5 C	7 C	9 C
18″ (450mm)	5 C	8 C	9 C
> 18″ (450mm)	Contact SealXpert for recommendations

Roll size

A (2″ x 5′) (50mm x 1.2m)

A (2″ x 6′) (50mm x 1.8m)

B (2″ x 12′) (50mm x 3.6m)

B (3″ x 9′) (75mm x 2.7m)

C (4″ x 12′) (100mm x 3.6m)

WRAP SEAL OFFLINE LEAK REPAIR PROCEDURE:

1. Stop the pipe flow
2. Roughen the area to be repaired
3. Knead the Seal Stic
4. Apply the Seal Stic to fill in holes or crack of the damaged or leak area.
5. Immerse the Wrap Seal Fiberglass Tape into water
6. 6Wrap the Wrap Seal Fiberglass Tape around the repair area as tightly and evenly as possible, using the entire roll
7. Discard the plastic tube at the end of the roll
8. Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap
9. Continue to polish the wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance

Note: 
Pembelian bahan Kimia ini harus melampirkan Company Profile (CV atau PT), Perorangan tanpa Identitas perusahaan tidak akan dilayani.

#tokokimiabatam, #bahankimia, #kimiabatam, #chemicalsbatam, #cleaningchemicals, #floorcaremaintenance, #floorchemicals, #floorfinish, #alkalinecleaner, #superkleen

Related product you might see: