MARINE CHOCK

MC38 MARINE CHOCK


MC38 MARINE CHOCK

FEATURES


  • Two-part pourable chocking compound with excellent mechanical strength
  • Allow pouring up to 80mm thickness
  • High compressive strength and impact strength
  • Excellent resistant to chemicals
  • Applicable to mounting main engines, auxiliary gears, compressors, pumps, thrust and support bearings, etc.

APPLICATION


  • Developed for chocking marine main propulsion and auxiliary machinery
  • Also used for sterntube and strut bearings, pintle and rudder bearings, pedestal bearings, steering gears, stern winches, engine room pumps, cargo pumps, cable penetrations, large ball or roller bearings, bow thrusters and anchor windlasses

TECHNICAL DATA

Volume of solids
62 %
Mix ratio – by weight
5:1
Mix ratio – by volume
3.4:1
Coefficient of linear thermal expansion
43.8 x 10⁻⁶ 1/K
Compressive strength
164 N/mm2
Tensile strength
49.4 N/mm2
Pot life
30 min. @ 25°C / 10 min. @ 50°C
Cure time
48 hours @ 16°C / 28 hours @ 21°C
Hardness – Shore D
83
Dry time at 21°C
12 hours

PACKAGE:


  • 3.8 litres/set






Related product you might see:

Share this product :

Post a Comment

Note: Only a member of this blog may post a comment.

 
Support : SEAL EXPERT INDONESIA | PT. TRIAS NATHOMI CHEMINDO | Indonesia
Copyright © 2019. Sealerproduct - All Rights Reserved
Web Design by PT.HUTA DIGITAL SOLUSI
UA-102567637-1