RC680 RETAINING COMPOUNDS

SEALXPERT RC680 RETAINING COMPOUNDS


FEATURES:



  • High strength, medium viscosity
  • Enhances bonding strength


APPLICATION:



  • Used for diametral clearance of less than 0.01” (0.25 mm) clearance fit or transition fit with the best fit clearance between 0.002” (0.05 mm) to 0.004” (0.10 mm)
  • Replace press fit and prevent rust
  • Used for slight rotating (worn) bearing, shaft sleeve etc. fittings, retain belt pulley, bushing, gear wheel, rotor, rebuild hole-shaft fitting parts and out-of-tolerance parts
  • Designed for transition and interference fit.


TECHNICAL DATA

Product No.
RC680 RETAINING COMPOUNDS
Typical Use
For clearance and transition fit
Max Gap Fill
0.25 mm
Uncured
Colour
Green
Viscosity
1,250 mPa.s
Specific Gravity
1.12 g/cm3
Cured
Shear Strength
> 2756psi /(> 194) kg/cm2
Temp. Range
-50 to 150°C (-58 to 302°F)
Curing Speed
Fixture
10 – 15 min
Full Cure
24 hour


Note: 
Pembelian bahan Kimia ini harus melampirkan Company Profile (CV atau PT), Perorangan tanpa Identitas perusahaan tidak akan dilayani.













#tokokimiabatam, #bahankimia, #kimiabatam, #chemicalsbatam, #cleaningchemicals, #floorcaremaintenance, #floorchemicals, #floorfinish, #alkalinecleaner, #superkleen









Related product you might see:

Share this product :

Post a Comment

Note: Only a member of this blog may post a comment.

 
Support : SEAL EXPERT INDONESIA | PT. TRIAS NATHOMI CHEMINDO | Indonesia
Copyright © 2019. Sealerproduct - All Rights Reserved
Web Design by PT.HUTA DIGITAL SOLUSI
UA-102567637-1