WRAP SEAL ULTRA QUICK REPAIR KIT FOR ACTIVE PIPE LEAKS

ACTIVE LEAK REPAIR KIT - WRAP SEAL ULTRA QUICK REPAIR KIT FOR ACTIVE PIPE LEAKS

FEATURES:

• Repairs under active leak up to 150 psi (11 kg/cm2) pressure
• No shutdown required
• Works on any metal or non-metal pipes
• Applicable to pipes up to 18″ (457 mm) diameter
• Repairs leak in 15 minutes
• Withstand pressure up to 500 psi (35 kg/cm2)
• Withstand temperature up to 200 °C (392 °F)
• Safe for drinking water and resistant to most chemicals
• Ideal for pipeline reinforcement

APPLICABLE MATERIAL:

• Steel
• Copper
• Aluminium
• Galvanized steel
• PVC
• CPVC
• Stainless steel
• Polyethylene
• Polypropylene
• Cast-iron
• Concrete
• FRP/GRE

CHEMICAL RESISTANCE:

• Oil
• Water (drinking water, wastewater, steam)
• Solvents (acetone, toluene, MEK, ethyl alcohol)
• Mild acids (hydrochloric acid, sulfuric acid) and alkalis
• Chemical (ethylene glycol, xylenes, ammonia)
• Hydrocarbons
• Bases
• Slurries
• Fuels (petroleum, diesels, gasoline)
• Gases (LNG, LPG)
• Organic salts

WORKING TIME (FIBERGLASS TAPE):

•  1 minute at 30 °C (86 °F)

CURING TIME:

• 30 minutes at 30 °C (86 °F)
• Heat may be applied to decrease curing time
• Unopened foil pouch may be immerse in cold water prior to repair to add working and curing time.

APPLICATION:

• Pipe repairs
• active pipe leaks
• sealing joints
• hazardous material spill control
• reinforce thinning walls
• Repairs in hard to reach areas
• Underwater repairs

OPERATING TEMPERATURE:

•  -50 °C (-58 °F) to 200 °C (392 °F)

OPERATING PRESSURE:

• Recommended for pressure up to 500 psi (35 kg/cm2)
• (Result vary depending on pipe size, type of pipe, hole size, pipe content and method of application)

APPLICABLE INDUSTRIES:

TECHNICAL DATA

Tensile strength	:	3920 psi (276 kg/cm2)
Bond strength	:	230 psi (16 kg/cm2)
Tensile elongation	:	1.2 % ± 0.7 %
Compression strength	:	13750 ± 530 psi (967 ± 37 kg/cm2)
Yield strength	:	2260 psi (159 kg/cm2)
Cured hardness	:	82 Shore D
Dielectric strength	:	400 Volts/mil
Pipe size	Number of rolls / size required
	50 psi (4 kg/cm2) 10 plys	150 psi (11 kg/cm2) 15 plys	400 psi (28 kg/cm2) 20 plys
½” (15mm)	1 A	1 A	1 A
¾” (20mm)	1 A	1 A	1 A
1″ (25mm)	1 A	1 A	2 A
1¼” (32mm)	1 A	2 A	3 A
1½” (40mm)	2 A	2 A	1 B
2″ (50mm)	1 B	1 B	1 B
2½” (65mm)	1 B	1 B	2 C
3″ (80mm)	1 B	2 C	2 C
4″ (100mm)	1 B	2 C	3 C

Pipe size	Number of rolls / size required
	50 psi (4 kg/cm2) 10 plys	150 psi (11 kg/cm2) 15 plys	400 psi (28 kg/cm2) 20 plys
5″ (125mm)	2 C	2 C	3 C
6″ (150mm)	2 C	2 C	4 C
8″ (200mm)	2 C	3 C	5 C
10″ (250mm)	3 C	4 C	6 C
12″ (300mm)	4 C	5 C	8 C
14″ (350mm)	4 C	6 C	8 C
16″ (400mm)	5 C	7 C	9 C
18″ (450mm)	5 C	8 C	9 C
> 18″ (450mm)	Contact SealXpert for recommendations

Roll size

A (2″ x 5′) (50mm x 1.2m)

A (2″ x 6′) (50mm x 1.8m)

B (2″ x 12′) (50mm x 3.6m)

B (3″ x 9′) (75mm x 2.7m)

C (4″ x 12′) (100mm x 3.6m)

WRAP SEAL ULTRA ACTIVE LEAK REPAIR PROCEDURE:

PACKAGE:

• 1 roll of Wrap Seal Fiberglass Tape

2″ x 6′ (50 mm x 1.8 m)

2″ x 12′ (50 mm x 3.6 m)

3″ x 9′ (75 mm x 2.7 m)

4″ x 12′ (100 mm x 3.6 m)

• 1 roll of SealXpert Ultra Sealing Tape

1″ x 16′ (25 mm x 5 m)

1″ x 16′ (25 mm x 5 m)

1¼” x 16′ (32 mm x 5 m)

2″ x 16′ (50 mm x 5 m)

• 1 unit of Seal Stic Quick Cure Epoxy
• 1 pair of latex gloves
• Operating instruction

Hubungi Kami:

Agent Seal-expert product in Indonesia

*JAKARTA: Jalan Industri KAV 9-11, Komplek GK Blok SB No.3

Kemayoran JAKARTA PUSAT; 10710; 

Telp: 021-62302799; HP/WA: 081270868021

email: triasnathomichemindo.pt@gmail.com

*BATAM: Komplek Ruko Batavia, Block. E1, no.21 Batu Aji - Batam

Telpon:0778-4091253; Hp/WA: 0812-7086-8021

Email: tokokimiabatam@gmail.com; Website: www.sealerproduct.com

#BahanKimia, #Specialistpipe, #Tokokimia, #Leak Reapai Kit, #Sealerproduct, #Wrap Seal Quick, #Repair Kit For Pipe Leaks, #WRAP SEAL ULTRA QUICK REPAIR KIT FOR ACTIVE PIPE LEAKS

 

Related product you might see: