Wrap Seal Active leak Repair KIT

 

Active Leak repair Kit

PACKAGE:

1 roll of Wrap Seal Fiberglass Tape

2″ x 6′ (50 mm x 1.8 m)

2″ x 12′ (50 mm x 3.6 m)

3″ x 9′ (75 mm x 2.7 m)

4″ x 12′ (100 mm x 3.6 m)

1 roll of SealXpert Ultra Sealing Tape

1″ x 16′ (25 mm x 5 m)

1″ x 16′ (25 mm x 5 m)

1¼” x 16′ (32 mm x 5 m)

2″ x 16′ (50 mm x 5 m)

1 unit of Seal Stic Quick Cure Epoxy

1 pair of latex gloves

Operating instruction

Model: 

• WSU0206
• WSU0212
• WSU0309
• WSU0412
• WSU0420
• WSU0430
• WSU0620
• WSU0630

WRAP SEAL ULTRA QUICK REPAIR KIT FOR ACTIVE PIPE LEAKS

FEATURES:

1. Repairs under active leak up to 150 psi (11 kg/cm2) pressure
2. No shutdown required.
3. Works on any metal or non-metal pipes
4. Applicable to pipes up to 18″ (457 mm) diameter
5. Repairs leak in 15 minutes
6. Withstand pressure up to 500 psi (35 kg/cm2)
7. Withstand temperature up to 200 °C (392 °F)
8. Safe for drinking water and resistant to most chemicals
9. Ideal for pipeline reinforcement

APPLICABLE MATERIAL:

1. Steel
2. Copper
3. Aluminum
4. Galvanized steel
5. PVC
6. CPVC
7. Stainless steel
8. Polyethylene
9. Polypropylene
10. Cast-iron
11. Concrete
12. FRP/GRE

CHEMICAL RESISTANCE:

1. Oil
2. Water (drinking water, wastewater, steam)
3. Solvents (acetone, toluene, MEK, ethyl alcohol)
4. Mild acids (hydrochloric acid, sulfuric acid) and alkalis
5. Chemical (ethylene glycol, xylenes, ammonia)
6. Hydrocarbons
7. Bases
8. Slurries
9. Fuels (petroleum, diesels, gasoline)
10. Gases (LNG, LPG)
11. Organic salts

WORKING TIME (FIBERGLASS TAPE):

 1 minute at 30 °C (86 °F)

CURING TIME:

• 30 minutes at 30 °C (86 °F)
• Heat may be applied to decrease curing time.
• Unopened foil pouch may be immersed in cold water prior to repair to add working and curing time.

APPLICATION:

• Pipe repairs.
• Active pipe leaks
• Sealing joints
• Hazardous material spill control
• Reinforce thinning walls.
• Repairs in hard-to-reach areas
• Underwater repairs

OPERATING TEMPERATURE:

 -50 °C (-58 °F) to 200 °C (392 °F)

OPERATING PRESSURE:

• Recommended for pressure up to 500 psi (35 kg/cm2)
• (Result vary depending on pipe size, type of pipe, hole size, pipe content and method of application)

APPLICABLE INDUSTRIES:

• Building and facilities
• Industrial processing
• Oil and gases.
• Military
• Electronics
• Chemical 

TECHNICAL DATA:

Tensile strength	:	3920 psi (276 kg/cm2)
Bond strength	:	230 psi (16 kg/cm2)
Tensile elongation	:	1.2 % ± 0.7 %
Compression strength	:	13750 ± 530 psi (967 ± 37 kg/cm2)
Yield strength	:	2260 psi (159 kg/cm2)
Cured hardness	:	82 Shore D
Dielectric strength	:	400 Volts/mil

Pipe size	Number of rolls / size required
	50 psi (4 kg/cm2) 10 plys	150 psi (11 kg/cm2) 15 plys	400 psi (28 kg/cm2) 20 plys
½” (15mm)	1 A	1 A	1 A
¾” (20mm)	1 A	1 A	1 A
1″ (25mm)	1 A	1 A	2 A
1¼” (32mm)	1 A	2 A	3 A
1½” (40mm)	2 A	2 A	1 B
2″ (50mm)	1 B	1 B	1 B
2½” (65mm)	1 B	1 B	2 C
3″ (80mm)	1 B	2 C	2 C
4″ (100mm)	1 B	2 C	3 C

 

Pipe size	Number of rolls / size required
	50 psi (4 kg/cm2) 10 plys	150 psi (11 kg/cm2) 15 plys	400 psi (28 kg/cm2) 20 plys
5″ (125mm)	2 C	2 C	3 C
6″ (150mm)	2 C	2 C	4 C
8″ (200mm)	2 C	3 C	5 C
10″ (250mm)	3 C	4 C	6 C
12″ (300mm)	4 C	5 C	8 C
14″ (350mm)	4 C	6 C	8 C
16″ (400mm)	5 C	7 C	9 C
18″ (450mm)	5 C	8 C	9 C
> 18″ (450mm)	Contact SealXpert for recommendations

 

Roll size

A (2″ x 6′) (50mm x 1.8m)

B (2″ x 12′) (50mm x 3.6m)

B (3″ x 9′) (75mm x 2.7m)

C (4″ x 12′) (100mm x 3.6m)

1Minimize the flow rate and reduce system pressure

2Roughen the area to be repaired

3Knead the Seal Stic

4Place the Seal Stic away from the leak location

5Start wrapping the SealXpert Ultra Sealing Tape a few distances away from the leak location

6Continue to wrap SealXpert Ultra Sealing Tape onto pipe while pushing the Seal Stic onto leak location

7Immerse Wrap Seal Fiberglass Tape into water

8Wrap the Wrap Seal Fiberglass Tape above the repair tape as tightly and evenly as possible, using the entire roll

9Discard the plastic tube at the end of the roll

10Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance

Related product you might see: