SealXpert™ Stainless Steel Pipe Clip

 

 Stainless Steel Pipe Clip

WSU0206

 

Wrap Seal® ULTRA Quick Repair Kit for Active Pipe Leaks

Features: 

1. Repairs under active leak up to 150 psi (11 kg/cm2 ) pressure 
2. No shutdown required 
3. Works on any metal or non-metal pipes 
4. Applicable to pipes up to 18” (457 mm) diameter 
5. Repairs leak in 15 minutes 
6. Withstand pressure up to 500 psi (35 kg/cm2 ) 
7. Withstand temperature up to 200 °C (392 °F) 
8. Safe for drinking water and resistant to most chemicals 
9. Ideal for pipeline reinforcement

Application:

• Pipe repairs: active pipe leaks , sealing joints , hazardous material spill control , reinforce thinning walls 
• Repairs in hard to reach areas 
• Underwater repairs

Package:

1 roll of Wrap Seal® Fiberglass Tape  + 1 roll of SealXpert® Ultra Sealing Tape

1. [WSU0206] 2” x 6’ (50 mm x 1.8 m) 
2. [WSU0212] 2” x 12’ (50 mm x 3.6 m) 
3. [WSU0309] 3” x 9’ (75 mm x 2.7 m) 
4. [WSU0412] 4” x 12’ (100 mm x 3.6 m

1 roll of SealXpert® Ultra Sealing Tape 

1. 1” x 16’ (25 mm x 5 m) 
2. 1” x 16’ (25 mm x 5 m) 
3. 1¼” x 16’ (32 mm x 5 m) 
4. 2” x 16’ (50 mm x 5 m)

1 unit of Seal Stic® Quick Cure Epoxy 

1 pair of latex gloves 

Operating instruction

Product selection guide

Wrap Seal® ULTRA Active Leak Repair Procedure:

SEALXPERT STAINLESS STEEL PIPE CLIP

SEALXPERT STAINLESS STEEL PIPE CLIP

SEALXPERT STAINLESS STEEL PIPE CLIP

FEATURES

• Makes pipe clips from 2” (50 mm) to 382” (9700 mm)
• Easy to use
• Versatile and fast to install
• No special tool is required
• Stainless steel 304 material
• Free to cut to any diameters required

APPLICATION

• For securing, mounting, strapping, clamping and positioning
• Can be used for all conventional clamping jobs
• Make any sizes from 2” (50 mm) diameter to 382” (9703 mm) diameter within seconds

APPLICABLE INDUSTRIES

1. Building & amp; Facilities
2. Electronics
3. Industrial Processing
4. Irrigation
5. Oil & amp; Gas
6. Chemical
7. Manufacturing Plants
8. Marine
9. Military
10. Offshore
11. Food Processing
12. Petrochemical
13. Pharmaceutical
14. Power Generation
15. Pulp & amp; Paper
16. Wastewater
17. Water Distribution

TECHNICAL DATA

Material grade	All stainless steel 304
Band length	100’ (30.5 m)
Band width	0.5” (12.7 mm)
Head	0.3” (7.9 mm) slotted hex head screw
Closure components	0.6” (14.2 mm) wide fastener & screw housing assembly

SEALXPERT STAINLESS STEEL PIPE CLIP INSTALLATION PROCEDURE
I. Determine actual band length in one of two ways:
(a) If diameter is known, refer to band length table below
(b) If diameter is not known, measure circumference with string, twine, etc. and subtract 4” (to allow for length of fastener ends) to determine actual band length.

Pipe Diameter	Length to cut on Mark	Pipe Diameter	Length to cut on Mark	Pipe Diameter	Length to cut on Mark
2” (50.8 mm)	2-1/2” (63.5 mm)	22” (558.8 mm)	65-7/8” (1673.2 mm)	60” (1524.0 mm)	184-13/16” (4694.2 mm)
3’ (76.2 mm)	5-1/16” (128.6 mm)	24” (609.6 mm)	72-1/8” (1832.0 mm)	62” (1574.8 mm)	191-1/8” (4854.6 mm)
4” (101.6 mm)	8-7/8” (225.4 mm)	26” (660.4 mm)	77-1/4” (1962.2 mm)	64” (1625.6 mm)	197-7/16” (5014.9 mm)
5” (127.0 mm)	11-7/16” (290.5 mm)	28” (711.2 mm)	83-5/8” (2124.1 mm)	66” (1676.4 mm)	203-5/8” (5172.1 mm)
6’ (152.4 mm)	15-3/16” (385.8 mm)	30” (762.0 mm)	89-7/8” (2282.8 mm)	68” (1727.2 mm)	209-15/16” (5332.4 mm)
7” (177.8 mm)	17-3/4” (450.9 mm)	32” (812.8 mm)	96-3/8” (2447.9 mm)	70” (1778.0 mm)	216-1/4” (5492.8 mm)
8” (203.2 mm)	21-1/2” (546.1 mm)	34” (863.6 mm)	102-5/8” (2606.7 mm)	72” (1828.8 mm)	222-9/16” (5653.1 mm)
9” (228.6 mm)	24-1/8” (612.8 mm)	36” (914.4 mm)	108-7/8” (2765.4 mm)	74” (1879.6 mm)	228-7/8” (5813.4 mm)
10” (254.0 mm)	27-7/8” (708.0 mm)	38” (965.2 mm)	115-1/4” (2927.4 mm)	76” (1930.4 mm)	235-13/16” (5989.6 mm)
11” (279.4 mm)	30-3/8” (771.5 mm)	40” (1016.0 mm)	121-9/16” (3087.7 mm)	78” (1981.2 mm)	241-1/2” (6134.1 mm)
12” (304.8 mm)	34-3/16” (868.4 mm)	42” (1066.8 mm)	128” (3251.2 mm)	80” (2032.0 mm)	247-13/16” (6294.4 mm)
13” (330.2 mm)	36-3/4” (933.5 mm)	44” (1117.6 mm)	134-5/16” (3411.5 mm)	82” (2082.8 mm)	254-1/8” (6454.8 mm)
14” (355.6 mm)	40-1/2” (1028.7 mm)	46” (1168.4 mm)	140-5/8” (3571.9 mm)	84” (2133.6 mm)	260-7/16” (6615.1 mm)
15” (381.0 mm)	43-1/16” (1093.8 mm)	48” (1219.2 mm)	146-15/16” (3732.2 mm)	86” (2184.4 mm)	266-5/8” (6772.3 mm)
16” (406.4 mm)	46-7/8” (1190.6 mm)	50” (1270.0 mm)	153-1/4” (3892.6 mm)	88” (2235.2 mm)	272-15/16” (6932.6 mm)
18” (457.2 mm)	53-1/8” (1349.4 mm)	54” (1371.6 mm)	165-7/8” (4213.2 mm)	92” (2336.8 mm)	285-9/16” (7253.3 mm)
19” (482.6 mm)	55-3/4” (1416.1 mm)	56” (1422.4 mm)	172-3/16” (4373.6 mm)	94” (2387.6 mm)	291-7/8” (7413.6 mm)
20” (508.0 mm)	59-1/2” (1511.3 mm)	558” (1473.2 mm)	178-1/2” (4533.9 mm)	96” (2438.4 mm)	298-3/16” (7574.0 mm)

Measure band to proper length and cut through center of nearest round hole with shears, snips, hacksaw, etc.


II. Measure band to proper length and cut through center of nearest round hole with shears, snips, hacksaw, etc.
III. Engage one screw housing end to one perforated end by turning screw three or four times
IV. Complete the clamp by diagonally inserting the ends of the engaged fastener assembly to the band through the tops of the square holes at each end of the band
V. Tighten finished clamp