WRAP SEAL PLUS FIBERGLASS REPAIR TAPE

 

WRAP SEAL PLUS FIBERGLASS REPAIR TAPE

WRAP SEAL PLUS FIBERGLASS REPAIR TAPE

WRAP SEAL PLUS FIBERGLASS REPAIR TAPE

FEATURES

• Remediate, repairs and reinforces
• Durable, strong and permanent
• Restore pipes to original strength

APPLICATION

• Applied onto thinning pipe walls for pipeline reinforcement
• Improve hoop strength of pipeline after repair
• Suitable for pipe diameter up to 60″ (1524 mm)
• Applicable for pipeline temperature up to 280 °C (536 °F)

TECHNICAL DATA

Tensile modulus	3.8 x 106 psi (267166 kg/cm2)
Tensile strength	65000 psi (4570 kg/cm2)
Flexural modulus	3.6 x 106 psi (253105 kg/cm2)
Flexural strength	53100 psi (3733 kg/cm2)
Compressive strength	28500 psi (2004 kg/cm2)
Dielectric strength	20000 Volts
Hardness	85 Shore D

PACKAGE:

1. 4″ x 20′ (100 mm x 6 m)
2. 4″ x 30′ (100 mm x 9 m)
3. 6″ x 20′ (150 mm x 6 m)
4. 6″ x 30′ (150 mm x 9 m)

WRAP SEAL PLUS CORROSION REPAIR PROCEDURE

1. Corroded pipe surface
2. Roughen the area to be repaired
3. Mix and stir Wrap Seal PLUS Resin and Activator for at least 1 minute until well mixed
4. Apply two coats of activated resin evenly over the area to be repaired and allow to cure
5. Immerse Wrap Seal PLUS Fiberglass Repair Tape into water
6. Wrap the fiberglass repair tape as tightly and evenly as possible, with at least 50% overlap over affected pipe length
7. Discard the plastic tube at the end of the roll
8. Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance

FLAT SURFACE/TANK

Apply Several layers of wrap Seal PLUS Surface Tissue or Wrap Seal Plus Chopped
Strand Mat onto the affected area.