WRAP SEAL PLUS RESIN AND ACTIVATOR

WRAP SEAL PLUS RESIN AND ACTIVATOR

WRAP SEAL PLUS RESIN AND ACTIVATOR

FEATURES:

• Corrosion barrier and isolator
• High adhesion strength
• Excellent alkali and acid resistance
• Ease of application by using paint rollers and paint brush
• Applicable for pipes, tanks, and large surfaces

APPLICABLE MATERIAL:

• Galvanized steel
• Copper
• Stainless steel
• Carbon steel
• Concrete
• Polyethylene
• FRP/GRE

CHEMICAL RESISTANCE:

• MEK
• Diesel
• Ethylene glycol
• Ammonia
• Acetone
• Crude oil
• Toluene
• Ethyl alcohol
• Gasoline
• Sodium hydroxide

WORKING TIME:

•  10 minutes at 30 °C (86 °F)

CURING TIME:

•  2 hours at 30 °C (86 °F)

APPLICATION:

• Applied as corrosion coating on pipes, storage tanks, vessels, exhaust lines, bulkheads, machineries, joints, and large surfaces.
• Applied with Wrap Seal PLUS Uncoated Fiberglass Tape, Chopped Strand Mat or Surface Tissue for reinforcement, bonding and lamination

APPLICABLE INDUSTRIES:

• Building & amp; Facilities
• Electronics
• Industrial Processing
• Irrigation
• Oil & amp; Gas
• Chemical
• Manufacturing Plants
• Marine
• Military
• Offshore
• Food Processing
• Petrochemical
• Pharmaceutical
• Power Generation
• Pulp & amp; Paper
• Wastewater
• Water Distribution

TECHNICAL DATA:

Colour – Resin	Natural
– Activator	Straw colour
Viscosity	20000 – 40000 cps at 21 °C (70 °F)
Specific gravity	1.85
Compressive strength	24500 psi (1723 kg/cm2)
Tensile strength	35000 psi (2461 kg/cm2)
Bond strength	500 psi (35 kg/cm2)
Flexural strength	42000 psi (2953 kg/cm2)
Flexural modulus	1.6×106 psi (112491 kg/cm2)
Barcol hardness	40 – 50 Shore D
Coverage area (per set)	0.15 m2 at 3 mm thickness

WRAP SEAL PLUS CORROSION REPAIR PROCEDURE:

• Corroded pipe surface
• Roughen the area to be repaired
• Mix and stir Wrap Seal PLUS Resin and Activator for at least 1 minute until well mixed
• Apply two coats of activated resin evenly over the area to be repaired and allow to cure
• Immerse Wrap Seal PLUS Fiberglass Repair Tape into water
• Wrap the fiberglass repair tape as tightly and evenly as possible, with at least 50% overlap over affected pipe length
• Discard the plastic tube at the end of the roll
• Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance
• FLAT SURFACE/TANK
• Apply Several layers of wrap Seal PLUS Surface Tissue or Wrap Seal Plus Chopped
• Strand Mat onto the affected area.

Note: 

• Pembelian bahan Kimia ini harus melampirkan Company Profile (CV atau PT), Perorangan tanpa Identitas perusahaan tidak akan dilayani.

#tokokimiabatam, #bahankimia, #kimiabatam, #chemicalsbatam, #cleaningchemicals, #floorcaremaintenance, #floorchemicals, #floorfinish, #alkalinecleaner, #superkleen

Related product you might see: