WRAP SEAL PLUS RESIN AND ACTIVATOR
WRAP SEAL PLUS RESIN AND ACTIVATOR
FEATURES:- Corrosion barrier and isolator
- High adhesion strength
- Excellent alkali and acid resistance
- Ease of application by using paint rollers and paint brush
- Applicable for pipes, tanks, and large surfaces
APPLICABLE MATERIAL:
- Galvanized steel
- Copper
- Stainless steel
- Carbon steel
- Concrete
- Polyethylene
- FRP/GRE
CHEMICAL RESISTANCE:
- MEK
- Diesel
- Ethylene glycol
- Ammonia
- Acetone
- Crude oil
- Toluene
- Ethyl alcohol
- Gasoline
- Sodium hydroxide
WORKING TIME:
- 10 minutes at 30 °C (86 °F)
CURING TIME:
- 2 hours at 30 °C (86 °F)
APPLICATION:
- Applied as corrosion coating on pipes, storage tanks, vessels, exhaust lines, bulkheads, machineries, joints, and large surfaces.
- Applied with Wrap Seal PLUS Uncoated Fiberglass Tape, Chopped Strand Mat or Surface Tissue for reinforcement, bonding and lamination
APPLICABLE INDUSTRIES:
- Building & amp; Facilities
- Electronics
- Industrial Processing
- Irrigation
- Oil & amp; Gas
- Chemical
- Manufacturing Plants
- Marine
- Military
- Offshore
- Food Processing
- Petrochemical
- Pharmaceutical
- Power Generation
- Pulp & amp; Paper
- Wastewater
- Water Distribution
TECHNICAL DATA:
| Colour – Resin | Natural |
| – Activator | Straw colour |
| Viscosity | 20000 – 40000 cps at 21 °C (70 °F) |
| Specific gravity | 1.85 |
| Compressive strength | 24500 psi (1723 kg/cm2) |
| Tensile strength | 35000 psi (2461 kg/cm2) |
| Bond strength | 500 psi (35 kg/cm2) |
| Flexural strength | 42000 psi (2953 kg/cm2) |
| Flexural modulus | 1.6×106 psi (112491 kg/cm2) |
| Barcol hardness | 40 – 50 Shore D |
| Coverage area (per set) | 0.15 m2 at 3 mm thickness |
WRAP SEAL PLUS CORROSION REPAIR PROCEDURE:
- Corroded pipe surface
- Roughen the area to be repaired
- Mix and stir Wrap Seal PLUS Resin and Activator for at least 1 minute until well mixed
- Apply two coats of activated resin evenly over the area to be repaired and allow to cure
- Immerse Wrap Seal PLUS Fiberglass Repair Tape into water
- Wrap the fiberglass repair tape as tightly and evenly as possible, with at least 50% overlap over affected pipe length
- Discard the plastic tube at the end of the roll
- Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance
- FLAT SURFACE/TANK
- Apply Several layers of wrap Seal PLUS Surface Tissue or Wrap Seal Plus Chopped
- Strand Mat onto the affected area.
- Pembelian bahan Kimia ini harus melampirkan Company Profile (CV atau PT), Perorangan tanpa Identitas perusahaan tidak akan dilayani.
#tokokimiabatam, #bahankimia, #kimiabatam, #chemicalsbatam, #cleaningchemicals, #floorcaremaintenance, #floorchemicals, #floorfinish, #alkalinecleaner, #superkleen
